PET Preform Mold
Up to 72-cavity
Overview


A Full Range of PET Preform Mold as Follows:

● Water bottle neck finish: 30/25, 29/25, 26.7mm 3Start Alaska, up to 72-cavity

● CSD bottle neck finish: 28PCO1810, 28PCO1881, 28PCO Corvaglia, up to 72-cavity

● HR bottle neck finish: Non-crystallized 1810, Non-crystallized 1881, up to 72-cavity

● Edible oil neck finish: 29/21, 36/29, up to 72-cavity

● Drinks neck finish: 38mm 2Start HF Bericap, 38mm 3Start CF Bericap, up to 48-cavity


● Jumbo bottle neck finish: 48/41, 48/40, up to 24-cavity

● Wide mouth neck finish: up to 12-cavity

● Special thread neck finish: available on request and we are willing to adjust our mold to your special needs.


Specification
Technical Data (As per neck finish:28mm PCO1810)
23g Preform Length: 94mm 32g Preform Length: 120mm 42g Preform Length: 130mm
Cavity Number Dimension (mm) Weight(kg) Dimension (mm) Weight(kg) Dimension (mm) Weight(kg)
4 (1×4) 500×290×430 550 500×290×445 600 500×290×445 680
6 (2×3) 430×370×400 760 430×370×415 850 430×370×425 900
8 (2×4) 490×370×435 810 490×370×450 900 490×370×460 970
12 (2×6) 630×370×435 1020 630×370×450 1100 630×370×460 1180
16 (2×8) 750×370×480 1240 750×370×495 1350 750×370×505 1450
24 (3×8) 830×440×500 1880 830×440×515 1950 830×440×525 2060
32 (4×8) 830×580×515 2360 830×580×530 2550 830×580×545 2600
48 (4×12) 1065×580×525 2930 1065×580×540 3050 1065×580×555 3150
72 (6×12) 1140×830×560 4320 1140×830×575 4450 1140×830×580 4600
Note: Above specification are subject to change without prior notice. Dimension means Height × Width × Thickness.
Technical Description

● Precision machined, tolerance standards 0.003~0.005mm

● Interchangeable parts for every cavity

● Perfectly balanced hot-runner system

● Ideal gate cooling

● Low crystallinity

● Preform surface no scratches

● Low acetaldehyde (AA) levels

● Minimum eccentricity below 0.09mm (L=100mm)

● Strong dimensional stability

● Consistent weight

● Flash less split-lines